PackRyt® ORM

Save Face. Let us Bear the load.

Mechanical seals are ultra-precision devices with seal faces carefully lapped to less than 1.8 microns. This type of precision is expensive and downtime, due to seal face parting and failure, is even more costly.

BEARING & O-Ring SealinG System
PackRyt ORM schematic

Don't be fooled by copy-cats with inferior designs and materials.

PackRyt ORM with optional locking collar
Optional Locking Collar shown above.
ORM shown in black and white material -split design


SealRyt’s patented bearing technology augments Mechanical Seal performance by:

  • Minimizing radial shaft movement from run out or misalignment
  • Acting as the replaceable wear surface
  • Transferring load and wear from the seal faces to the bearing
  • Allowing the mechanical seal faces to remain in close contact and do their job
  • Aiding in vibration dampening


Questions? Ask our Engineers.

SealRyt Corp. is the industry leader in rotating shaft sealing technology. Our engineers have years of experience in the science of sealing. That's why we hold multiple patents on sealing technology. That's also why our products last longer, get better results, and simply seal better than any other products available.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

The root cause of most rotating equipment
failure is shaft movement

SealRyt's patented technology has proven it's ability to seal, support shafts, and increase reliability.

packryt-vibration illustration


Shaft movement in the stuffing box is unrestrained and is the root cause of equipment and sealing failures.

packryt bearing the load and stabilizing the shaft


The PackRyt Bearing System virtually eliminates shaft movement which increases both equipment and sealing reliability.

Case Studies

Dissolving Tank Agitators

A PackRyt® Sealing System was installed on 4 hard coated shaft tank agitator units and they have been running trouble free for over 2 years.

Previously these units had shaft change outs every year at a cost of approximately $80,000.00.

Stock Pumps

A PackRyt® Sealing System was installed on a 3175 stock pump having extreme leakage and maintenance issues. The PackRyt® eliminated the problems. All pumps and agitators on the paper machine and the pulp dryer are now being considered for change out.

Fiber Line Equipment

A chip chute pump was being re-packed every 2 months and now with the PackRyt® Sealing System installed it has one annual packing change. The bearing has had a life span of over 5 years.

We have compiled a list of life span results from different equipment the PackRyt BLR has been installed.


"Your product has performed as advertised and the service by your team has exceeded what was expected. Great job by everyone at SealRyt."
– Steve C., Maintenance/Shutdown Planner
"The PackRyt system works better than every other option that we tried."
– Pulp Mill Supervisor
"A good product, in the right application, that has served the mill well..."
– Andy B, Maintenance Supervisor
Read More Testimonials